Electronic differential pressure system utilizing two ceramic sensor modules and one transmitter. The electronic dp Deltabar FMD71 is a differential pressure system, used to measure the pressure or level, volume or mass of liquids in pressurized tanks or distillation columns/evaporators. The high pressure sensor (HP) measures the hydrostatic pressure. The low pressure sensor (LP) measures the head pressure. The level is calculated in the transmitter using these two digital values. The electronic dp system eliminates issues of traditional differential pressure measurements.
Archives: Products
Rosemount™ 3051S Differential Pressure Flow Transmitter
Combined with state-of-the art primary flow elements, the Rosemount 3051S Differential Pressure Flow Transmitter provides a scalable, no-equal solution for flow measurement applications. This flow transmitter seamlessly integrates with a variety of primary elements that can come pre-assembled to the device. With Ultra and Ultra for Flow performance classes, this transmitter features 15-year stability and 15-year limited warranty for accurate, long-lasting and reliable performance.
OPTISONIC 6300
Ultrasonic clamp-on flowmeter for flow measurement of liquids
- Stationary device, for installation at any location without process interruption or need to cut pipes
- Up to +200°C / +392°F
- Robust stainless steel sensor rail for pipes DN15…4000 / ½…160″
- 4…20 mA, HART®7, Modbus, FF, Profibus-PA/DP
Proline W 400 ultrasonic clamp-on flowmeter
Prosonic Flow W 400 is the ultrasonic clamp-on flowmeter of choice for safe, cost-effective and maintenance-free measurement of conductive and non-conductive liquids. It measures flow noninvasively and bidirectionally, independent of pressure, density and conductivity, and without process interruption. FlowDC makes mounting as flexible as never before. The specified accuracy is maintained at an inlet run of only 2 x DN, even in the case of disturbed flow profiles. Special coupling pads make this ultrasonic clamp-on system maintenance-free during the entire product life cycle. Heartbeat Technology provides continuous process transparency with its diagnostic, verification and monitoring functions. This way, build-up can be detected before it affects operation.
OPTIFLUX 6300
Electromagnetic flowmeter for advanced hygienic applications
- High accuracy (±0.2%), for exact dosing or filling in the food sector
- Meter size: DN2.5…150 / ⅒…6″ (3A, EHEDG certified)
- Many hygienic fittings
- 3 x 4…20 mA, HART®, Modbus, FF, Profibus-PA/DP, PROFINET
OPTIFLUX 5300
Electromagnetic flowmeter for advanced process and master meter applications
- Highest accuracy (±0.15%), with ceramic tube for aggressive and abrasive liquids (≤70% solid content) up to +180°C / +356°F
- CT: OIML R117, MI-005 etc.
- Flange: DN15…300 / ½…12″, max. PN40 / ASME Cl 300; Sandwich: DN2.5…100 / ⅒…4″
- 3 x 4…20 mA, HART®, Modbus, FF, Profibus-PA/DP, PROFINET
OPTIFLUX 4300
Electromagnetic flowmeter for advanced process and custody transfer (CT) applications
- High accuracy (±0.2%), certified for custody transfer
- For low conductivity media (>1 μS/cm) and high solid contents (≤70%)
- Flange: DN2.5…3000 / ⅒…120″, max. PN40 / ASME Cl 600 (higher on request)
- 3 x 4…20 mA, HART®,Modbus, FF, Profibus-PA/DP, PROFINET
WATERFLUX 3300
Electromagnetic flowmeter for advanced water applications
- High accuracy (±0.2%) for water consumption metering and distribution networks
- No inlet/outlet runs needed
- CT: MI-001, OIML R49 up to DN600 / 24″
- High accuracy (±0.2%) for water consumption metering and distribution networks
- No inlet/outlet runs needed
- CT: MI-001, OIML R49 up to DN600 / 24″
WATERFLUX 3070
Electromagnetic water meter for district metering of potable water and custody transfer (CT) measurement
- Battery- or mains powered, with battery backup option (incl. Modbus)
- Integrated temperature and pressure measurement for leak monitoring
- CT: MI-001, OIML R49 up to DN600 / 24″, no inlet/outlet runs needed
- Burial installation possible (IP68)
OPTIFLUX 2300
Electromagnetic flowmeter for advanced water and wastewater applications
- High accuracy (±0.2%), with CT approvals (OIML R49, MI-001)
- 0D/0D installation acc. to MID MI-001 and OIML R49 accuracy class 1
- Flange: DN25…3000 / 1…120″, max. PN40 / ASME Cl 300
- 3 x 4…20 mA, HART®, Modbus, FF, Profibus-PA/DP, PROFINET