WATERFLUX 3070

Electromagnetic water meter for district metering of potable water and custody transfer (CT) measurement

Battery- or mains powered, with battery backup option (incl. Modbus)
Integrated temperature and pressure measurement for leak monitoring
CT: MI-001, OIML R49 up to DN600 / 24″, no inlet/outlet runs needed
Burial installation possible (IP68)

Get a quote

The WATERFLUX 3070 is a battery powered electromagnetic water meter for use in water abstraction wells, district metering areas (DMA) and custody transfer measurement of potable water (MI-001, OIML R49). With optional pressure and temperature sensors, the meter can also be used for leak detection, quality control and pressure management systems. Unlike mechanical water meters, the WATERFLUX 3070 is maintenance-free and offers a much larger turn down ratio (1000:1). Its measuring tube with a rectangular and reduced cross-section enables a stable measurement even at low flow rates. Due to the optimized flow profile, the WATERFLUX 3070 can be installed virtually anywhere without straight inlet or outlet runs – behind pipe bends, slide valves or a reduction in the pipe. Even burial installation or use in flooded areas is possible.

Product positioning

For district metering of potable water and custody transfer (CT) measurement

Measurement principle

Electromagnetic

Measured media

Liquids

Operating conditions

Process pressure max. 16 barg/230 psig

Process temperature

-5…+70°C/+23…+158°F

Materials

LinerPolyamide polymer 11 (Rilsan®)

Process connections

Flange connections EN (1092-1): DN25…600

ASME (B 16.5): 1…24″

JIS (B 2220): 25…600A

Thread connections Male:

G1, G1½, G2

Installation conditions

Inlet run 0D

Outlet run 0D

Approvals/Standards

Certificates/Approvals Potable Water DVGW, NSF, TZW, KTW, WRAS, KIWA, ACS

Communication

Discrete outputs Pulse, Status

Digital outputs Modbus RTU

Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.

Bi-directional flow measurement over a wide dynamic range
Unique rectangular sensor design for good low flow performance
Available with patented reference electrode: no grounding rings needed
High accuracy at peak flows during the day and at low flows during the night
Rilsan® coated sensor tube
Meets potable water standards: ACS, DVGW, NSF, TZW, WRAS etc.
Suitable for immersion in flooded chambers
Battery-powered for remote locations or mains powered with battery backup
FlexPower option for power connection to electrical grid, solar panel or windmill
Unique low power Modbus option for battery-powered version
With CT approval for heat meter applications (MID MI-004)
Compact or field mounted version
On-site verification of flowmeter with OPTICHECK service tool